TIBURON(GK) >2008 > G 2.0 DOHC > Body Electrical System > Keyless Entry And Burglar Alarm>Troubleshooting  
TROUBLESHOOTING
BCM practices input/output actuation test with the hi-scan to find out input/output errors.
INPUT/OUTPUT MONITORING

 INPUT / OUTPUT
 NAME
 DISPLAY
 CONDITION
POWER
 INPUT
 Battery voltage
 Voltage
INPUT
 Key warning switch
 Key removal
Key insert
INPUT
 Accessory switch
 OFF
ON
INPUT
 IGN1 switch
 OFF
ON
INPUT
 IGN2 switch
 OFF
ON
INPUT
 Alternator voltage
 Voltage
OUTPUT
 Start inhibitor
 Enable
Disable
FLASHER
 INPUT
 Turn signal switch (LH)
 OFF
ON
INPUT
 Turn signal switch (RH)
 OFF
ON
OUTPUT
 Turn signal lamp (LH)
 OFF
ON
OUTPUT
 Turn signal lamp (RH)
 OFF
ON
INPUT
 Hazard swtich
 OFF
ON
INPUT
 Hazard detection current
 Current
LAMP
 INPUT
 Tail lamp switch
 OFF
ON
OUTPUT
 Tail lamp
 OFF
ON
INPUT
 Head lamp switch
 OFF
ON
INPUT
 Auto light area option
 Domestic
Export
INPUT
 Auto light sensor
 Voltage
 Control the head lamp at the auto light mode
OUTPUT
 Head lamp
 OFF
ON
INPUT
 Front fog lamp switch
 OFF
ON
INPUT
 Rear fog lamp switch
 OFF
ON
OUTPUT
 Rear fog lamp
 OFF
ON
DOOR
 INPUT
 Driver's door switch
 CLOSE
OPEN
INPUT
 Assist door switch
 CLOSE
OPEN
INPUT
 All door switch
 CLOSE
OPEN
OUTPUT
 Key hole illumination
 OFF
ON
 The key hole illumination is turned off when the ignition switch is turned on.
OUTPUT
 Room lamp
 OFF
ON
INPUT
 Hood switch
 CLOSE
OPEN
INPUT
 Tailgate switch
 CLOSE
OPEN
INPUT
 Tailgate key unlock switch
 OFF
ON
 When open the tailgate with other key.
LOCK & FOLING
 INPUT
 Driver's door lock switch
 LOCK
UNLOCK
INPUT
 Assist door lock switch
 LOCK
UNLOCK
OUTPUT
 Lock output
 OFF
ON
OUTPUT
 Unlock output
 OFF
ON
INPUT
 Folding switch
 OFF
ON
OUTPUT
 Folding output
 OFF
ON
OUTPUT
 Unfolding output
 OFF
ON
WIPER
 INPUT
 Front washer switch
 OFF
ON
INPUT
 Intermittent wiper switch
 OFF
ON
OUTPUT
 Intermittent wiper relay
 OFF
ON
INPUT
 Intermittent wiper resistance
 Resistance
INPUT
 Low/high wiper input
 OFF
ON
INPUT
 Wiper parking switch
 Motor operation
Parking position
OUTPUT
 Snow safe relay
 OFF
ON
 Snow safety operation
OTHERS
 OUTPUT
 Power window power
 OFF
ON
INPUT
 Seat belt switch
 Seat belt removal
Seat belt installation
OUTPUT
 Seat belt indicator
 OFF
ON
OUTPUT
 Chime bell
 OFF
ON
INPUT
 Over speed signal
 OFF
ON
 When the vehicle speed is over 120km
INPUT
 Rear window defogger switch
 OFF
ON
OUTPUT
 Rear widnow defogger
 OFF
ON
 On starting state
INPUT
 Crash sensor
 OFF
ON
 On crash state
OUTPUT
 Burglar alarm horn
 OFF
ON

The components which is on and off as like turn signal lamp, seat belt indicator, burglar alarm horn, chime bell and front wiper relay are displayed "ON"while controlling.
MENU COMPOSITION
1.
INPUT/OUTPUT MONITORING

2.
INPUT ACTUATION TEST
3.
OUTPUT ACTUATION TEST
INPUT SIGNAL ACTUATION TEST
NUMBER
 INPUT / OUTPUT
 NAME
 OPERATION
 CONDITION
1
 INPUT
 Turn signal switch (LH)
 Turn signal lamp (LH)
2
 INPUT
 Turn signal switch (RH)
 Turn signal lamp (RH)
3
 INPUT
 Hazard switch
 Hazard lamp
4
 INPUT
 Turn signal lamp detection current
 Double flash
 Turn signal lamp switch ON
5
 INPUT
 Tail lamp switch
 Tail lamp
6
 INPUT
 Auto light switch
 Tail/head lamp
7
 INPUT
 Auto light sensor voltage
Auto light switch ON
8
 INPUT
 Rear fog lamp switch
 Rear fog lamp
 Tail lamp and front fog lamp ON or head lamp ON
9
 INPUT
 Driver's door lock switch
 Door lock/unlock output
10
 INPUT
 Assist's door lock switch
 Door lock/unlock output
11
 INPUT
 Folding switch
 Mirror folding/unfolding
12
 INPUT
 Front washer switch
 Front wiper relay
13
 INPUT
 Intermittent wiper switch
 Front wiper relay
14
 INPUT
 Seat belt switch
 Seat belt indicator
15
 INPUT
 Over speed signal
 Chime
16
 INPUT
 Crash sensor
 Door unlock output
 Only one time when IGN ON
17
 INPUT
 Rear window defogger switch
 Rear window defogger output
 Starting state

Actuation test is turned off under the following conditions.
1.
When the [STOP] switch is pressed.
2.
When the [ESC] switch is pressed.
3.
When the hi-scan is turned off.
4.
When the hi-scan is disconnected.
5.
When the actuation test is turned off by the hi-scan timer.
OUTPUT SIGNAL ACTUATION TEST
NUMBER
 INPUT / OUTPUT
 NAME
 OPERATION
 CONDITION
1
 OUTPUT
 Start inhibitor
 Starting disable
 Timer (15 sec.)
2
 OUTPUT
 Turn signal lamp (LH)
 Turn signal lamp (LH)
3
 OUTPUT
 Turn signal lamp (RH)
 Turn signal lamp (RH)
4
 OUTPUT
 Tail lamp
 Tail lamp
5
 OUTPUT
 Head lamp
 Head lamp
6
 OUTPUT
 Rear fog lamp
 Rear fog lamp
7
 OUTPUT
 Key hole illumination
 Key hole illumination
8
 OUTPUT
 Room lamp
 Room lamp
9
 OUTPUT
 Door lock output
 Door lock
10
 OUTPUT
 Door unlock output
 Door unlock
11
 OUTPUT
 Folding output
 Mirror folding
12
 OUTPUT
 Unfolding output
 Mirror unfolding
13
 OUTPUT
 Intermittent wiper relay
 Wiper output
14
 OUTPUT
 Snow safe relay
 Wiper not operating
15
 OUTPUT
 Power window power
 Power window power
16
 OUTPUT
 Rear window defogger
 Rear window defogger
17
 OUTPUT
 Burglar alarm horn
 Burglar alarm horn

Actuation test is turned off under the following conditions.
1.
When the [STOP] switch is pressed.
2.
When the [ESC] switch is pressed.
3.
When the hi-scan is turned off.
4.
When the hi-scan is disconnected.
5.
When the actuation test is turned off by the hi-scan timer.